Author | Topic |
Location: Bundaberg, Qld.
Registered: May 2002
|
Re: 4AGZE /4AGTE
|
Tue, 04 May 2004 12:34
|
|
^^ what he said..
basically i:
used the longer bolts and studs (4age).
removed the butterflies from the t-vis plates (it comes in 2 peices), by removing the 2 small srews in each butterfly plate.
i then used liquid steel to block the inner 2 holes the shaft went through that are open to the atmosphere when the shaft is removed.
i put a vacum cap over the nipple that hangs out the bottom of 1 of the peices.
used some new gaskets and bolted the t-vis plate and inlet manifold to the head.
|
|
|