Author | Topic |
I supported Toymods
Location: sydney.au
Registered: August 2002
|
Re: ae86 short stroke rear shocks
|
Thu, 06 May 2004 10:08
|
|
step 1
take shocks out. put old ones on for meantime.
step 2
take out springs + measure the freeheight (uncompressed height) of the springs. do front AND back. now decide how much you want to lower the car and take of that mm value from your current height. make sure front and back are equal freeheights
step 3
call KMAC.
> K-Mac Suspension
> 366 Princes Hwy Rockdale 2216 Sydney NSW
> Ph (02) 9556 1799
> Fax (02) 9556 1507
step 4
ask for 5.0 kg/mm AE86 rear springs in your preferred height
ask for 7.5 kg/mm AE86 front springs in your preferred height
step 5
install and enjoy your new solid springs
(warning. ride will be solid and possibly unconfortable with these rates. if your a pussy then lessen the kg/mm rate. i run an 8.5kg/mm front and a 6.5kg/mm rear, solid but not impossibly hard. 7.5 and 5 is just good.)
|
|
|