| Author | Topic |
|---|
Location:
Bundaberg, Qld.
Registered:
May 2002
|
|
Re: 4A-G/GZ Pulsation Damper
|
Wed, 04 September 2002 22:03
 
|
 |
 mmmmmmmmm............
i'm not sure if that diagram is wrong or maybe it's just a completely different setup to any ge i've ever seen. the fuel reg is (on mine) the one that say's (on your diagram) the pulsation damper. and the pulsation damper (on mine) is what in the diagram says is the fuel reg.???!!!??
it must be wrong, as in that diagram it's fuel reg has no return line, which i bet is on the bottom side of the (so called) pulsation damper, there is the fuel return line. as the vsv is a vacum switch, it operates the fuel reg, not the pulsation damper.(and your diagram shows a vacum line to it).
oh, yeah the ze does have a cold start injector, it is mounted on the cast pipe after the intercooler b4 it goes into the inlet manifold.
|
|
|
| | Subject | Poster | Date |
|---|
 |
4A-G/GZ Pulsation Damper
|
dorikin ichiban | Wed, 04 September 2002 04:38 |
|
Re: 4A-G/GZ Pulsation Damper
|
haggis | Wed, 04 September 2002 07:34 |
|
Re: 4A-G/GZ Pulsation Damper
|
RA23_Sean | Wed, 04 September 2002 10:38 |
|
Re: 4A-G/GZ Pulsation Damper
|
feral4mr2 | Wed, 04 September 2002 13:38 |
|
Re: 4A-G/GZ Pulsation Damper
|
dorikin ichiban | Wed, 04 September 2002 20:08 |
|
Re: 4A-G/GZ Pulsation Damper
|
feral4mr2 | Wed, 04 September 2002 21:40 |
|
Re: 4A-G/GZ Pulsation Damper
|
dorikin ichiban | Wed, 04 September 2002 21:46 |
|
Re: 4A-G/GZ Pulsation Damper
|
feral4mr2 | Wed, 04 September 2002 22:03 |
|
Re: 4A-G/GZ Pulsation Damper
|
dorikin ichiban | Wed, 04 September 2002 22:53 |
|
Re: 4A-G/GZ Pulsation Damper
|
kingmick | Thu, 05 September 2002 11:49 |
|
Re: 4A-G/GZ Pulsation Damper
|
TE72_Turbo | Thu, 05 September 2002 12:58 |
