Author | Topic |
Location: Brisbane
Registered: May 2002
|
Re: 18r into an sa63, yes/no?
|
Tue, 11 May 2004 04:06
|
|
A 3S-GE into any RWD platform is not a simple thing to do, unless you're using an Altezza engine of course. If it was simple you'd see people doing it all the time, but in fact it's quite rare.
The major headache is the manifolds which point in the wrong directions and foul important stuff, like the bonnet. These problems can be fixed but not easily or cheaply.
I can't see a problem with a late-model 18R-GEU into an SA63. These were factory fitted in JDM RA63's, and it's certainly a huge improvement on the 2S-C.
|
|
|
| Subject | Poster | Date |
|
18r into an sa63, yes/no?
|
The Untouchable | Fri, 07 May 2004 07:47 |
|
Re: 18r into an sa63, yes/no?
|
celicaboy | Fri, 07 May 2004 07:51 |
|
Re: 18r into an sa63, yes/no?
|
Evil_Foetus | Sat, 08 May 2004 03:12 |
|
Re: 18r into an sa63, yes/no?
|
ZZT231 | Sat, 08 May 2004 05:08 |
|
Re: 18r into an sa63, yes/no?
|
Evil_Foetus | Sat, 08 May 2004 07:57 |
|
Re: 18r into an sa63, yes/no?
|
ZZT231 | Sat, 08 May 2004 10:40 |
|
Re: 18r into an sa63, yes/no?
|
celicaboy | Sat, 08 May 2004 12:36 |
|
Re: 18r into an sa63, yes/no?
|
mrshin | Sat, 08 May 2004 12:39 |
|
Re: 18r into an sa63, yes/no?
|
ZZT231 | Sat, 08 May 2004 12:47 |
|
Re: 18r into an sa63, yes/no?
|
mrshin | Sat, 08 May 2004 12:50 |
|
Re: 18r into an sa63, yes/no?
|
Evil_Foetus | Sun, 09 May 2004 06:56 |
|
Re: 18r into an sa63, yes/no?
|
The Untouchable | Sun, 09 May 2004 09:45 |
|
Re: 18r into an sa63, yes/no?
|
ra23celica | Mon, 10 May 2004 03:35 |
|
Re: 18r into an sa63, yes/no?
|
mrshin | Mon, 10 May 2004 12:53 |
|
Re: 18r into an sa63, yes/no?
|
Evil_Foetus | Tue, 11 May 2004 01:26 |
|
Re: 18r into an sa63, yes/no?
|
ViPeR_NiPPleX | Tue, 11 May 2004 02:12 |
|
Re: 18r into an sa63, yes/no?
|
Norbie | Tue, 11 May 2004 04:06 |
Current Time:
Tue Dec 24 18:27:07 UTC 2024 |
Total time taken to generate the page: 0.0074648857116699 seconds |