| Author | Topic |
|---|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
Re: Injectors: Impedence
|
Thu, 13 May 2004 00:28
|
 |
all amps are approximate 
low imp (2ohms) peak and hold = 4A spike and 1A to hold
high imp (12ohms) = 1A continuous
if you put high imp into peak and hold, you have 1/6th the current going thru them...
so they may open with the spike (.67A) but may close after (0.17A)... so they may either be lazy or not work.
then again, you're prolly not going to blow the ECU by running high imp injectors peak and hold..
the other way, you have 6 times as much current = bad for the ECU's FET's 
get a megasquirt, it does both types  heh heh 
Cya, Stewart
|
|
|
