Author | Topic |
Location: Northwestern Sydney
Registered: August 2002
|
Re: 18rg EFI injection setup
|
Thu, 13 May 2004 23:03
|
|
You will need the intake manifold, plenum, AFM + piping and brackets, wiring loom, ECU, igniter, electronic dizzy, lifter pump, hi-pressure pump, surge tank. (+ EFI fuel lines, clips, gaskets and all the other little thing that should be changed)
Other than that it all bolts up to the 18R-G and needs to be wired in to the car (which is fairly basic if you have a diagram and a complete loom)
|
|
|