| Author | Topic |
|---|
Location:
Melbourne
Registered:
November 2003
|
|
Re: TA22 Central Locking...
|
Fri, 14 May 2004 00:36
 
|
 |
Thanks, its a work in progress. Hopefully it will eventually be a faithful document of the work on the car.
In answer to your question, I used a very short screwdriver 
You need to be a little bit careful with the clamp block. In the kit I got it was diecast (so it only looks like brass) and the one in the passenger door eventually (about 3 years later) broke on the casting line. I imagine this was from me overtightening the screws.
If you do break one, I found the only place you can get them from is a car audio place (like strathfield) where they will have spares from their own installations.
Good luck with your install!
Cheers,
Dan
|
|
|
| | Subject | Poster | Date |
|---|
 |
TA22 Central Locking...
|
Grega | Wed, 12 May 2004 20:30 |
|
Re: TA22 Central Locking...
|
dcleyne | Thu, 13 May 2004 00:48 |
|
Re: TA22 Central Locking...
|
Grega | Thu, 13 May 2004 01:23 |
|
Re: TA22 Central Locking...
|
dcleyne | Thu, 13 May 2004 01:36 |
|
Re: TA22 Central Locking...
|
Grega | Thu, 13 May 2004 01:42 |
|
Re: TA22 Central Locking...
|
silver_sleeka74 | Thu, 13 May 2004 02:09 |
|
Re: TA22 Central Locking...
|
Grega | Thu, 13 May 2004 02:46 |
|
Re: TA22 Central Locking...
|
peewee | Thu, 13 May 2004 03:35 |
|
Re: TA22 Central Locking...
|
Disco Scoob | Thu, 13 May 2004 05:12 |
|
Re: TA22 Central Locking...
|
rxtoy | Thu, 13 May 2004 10:48 |
|
Re: TA22 Central Locking...
|
ozboy | Thu, 13 May 2004 12:12 |
|
Re: TA22 Central Locking...
|
dcleyne | Thu, 13 May 2004 14:41 |
|
Re: TA22 Central Locking...
|
Grega | Thu, 13 May 2004 19:53 |
|
Re: TA22 Central Locking...
|
dcleyne | Fri, 14 May 2004 00:36 |
|
Re: TA22 Central Locking...
|
Grega | Fri, 14 May 2004 03:01 |
|
Re: TA22 Central Locking...
|
dcleyne | Fri, 14 May 2004 03:38 |
|
Re: TA22 Central Locking...
|
stylez | Fri, 14 May 2004 04:34 |
