F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » why wont it fire? (4k + dcoe webers) Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
pro_ke Forums Junkie Location: adelaide Registered: April 2003	why wont it fire? (4k + dcoe webers) Mon, 17 May 2004 14:31 ok along with the 2 40DCOE carbs i have just put a higher compression (approx 10.5:1) + modified head and more aggressive cam in/on my 4k, the problem i have is the motor will not fire when i crank it. here is what i have done/checked so far : - fuel is 1 day old bp ultimate (old fuel completely drained) - plugs are not fouled + brand new - there is spark at the end of the leads (screwdriver test a-ok) - fuel pressure is 5psi at the fuel rail - carbs are full of fuel - jets are not blocked (removed + blew them out to make sure) - aux venturis are not blocked (also blown out) - cam timing is correct - dizzy is in correctly yesterday when i removed the plugs to check for fouling i sprayed a little bit of aerostart down into each combustion chamber to see what would happen - when i cranked it the motor fired for probably 2 revolutions (still turning off the starter though). so basically if there is fuel in the c/chamber it will fire so im at a bit of a loss as to what to check next. basically i want to get it running (if its very rough i dont care) so i dont have to waste a pile of cash towing it around to get a whole bunch of small jobs done (exhaust mods, interior etc) anyone have any ideas? [Report message to a moderator]

	Subject	Poster	Date
	why wont it fire? (4k + dcoe webers)	pro_ke	Mon, 17 May 2004 14:31
	Re: why wont it fire? (4k + dcoe webers)	Grega	Mon, 17 May 2004 20:10
	Re: why wont it fire? (4k + dcoe webers)	mrshin	Tue, 18 May 2004 00:08
	Re: why wont it fire? (4k + dcoe webers)	pro_ke	Tue, 18 May 2004 00:17
	Re: why wont it fire? (4k + dcoe webers)	Grega	Tue, 18 May 2004 00:27
	Re: why wont it fire? (4k + dcoe webers)	pro_ke	Tue, 18 May 2004 00:31
	Re: why wont it fire? (4k + dcoe webers)	oldcorollas	Tue, 18 May 2004 03:14
	Re: why wont it fire? (4k + dcoe webers)	pro_ke	Tue, 18 May 2004 04:15
	Re: why wont it fire? (4k + dcoe webers)	Jason	Tue, 18 May 2004 04:25
	Re: why wont it fire? (4k + dcoe webers)	pro_ke	Tue, 18 May 2004 05:39
	Re: why wont it fire? (4k + dcoe webers)	[TOYROTA]	Tue, 18 May 2004 05:25
	Re: why wont it fire? (4k + dcoe webers)	YelloRolla	Tue, 18 May 2004 07:58
	Re: why wont it fire? (4k + dcoe webers)	pro_ke	Tue, 18 May 2004 08:26
	Re: why wont it fire? (4k + dcoe webers)	YelloRolla	Tue, 18 May 2004 08:36
	Re: why wont it fire? (4k + dcoe webers)	10sec_rx7	Tue, 18 May 2004 23:45

Previous Topic:	Before engineer's certificate
Next Topic:	Sprinter Part number needed

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.