If possible I was planning on using the stock piping that connects the airbox to the throttle currently, however if this wont work I was planning to use a similar piece of piping that can accomodate the pod.
On closer inspection there are two sensors that take readings from the airbox, there is one outlet that two small rubber hoses go off to seperate sensors. One of the sensors sits mounted to the outside of the airbox and the other mounted on the firewall next to the strutt tower and has a sticker on it which says F (Vacuum). Upon disconnection of this tube from the airbox the car seem to run fine however I didnt test it for that long but it did idle fine.
Wed, 19 May 2004 07:46
