| Author | Topic |
|---|
Location:
Perth
Registered:
June 2002
|
|
Re: AE86 r32/nissan GTR/GTST front brake conversion
|
Fri, 21 May 2004 14:52
 
|
 |
Just completed this very conversion.
Although I did it a little different to others.
I used the R32 calipers and matching rotors. This gives you a new PCD of 5 x 114.3
I made custom hubs and caliper brackets. The hubs bolt to the standard sprinter strut. Original wheel bearings and seal can be used.
There are cheaper ways of doing it, do a search for this info, but none let you retain the sprinter strut and bearings.
You could also use s13 struts as a base and go from there but i think 5 studs is the go just due to the mag selection.
Cheers
Gabe
|
|
|
