| Author | Topic |
|---|
Location:
Montrose, VIC
Registered:
May 2002
|
|
Re: AE86 r32/nissan GTR/GTST front brake conversion
|
Sun, 23 May 2004 02:51
 
|
 |
Alrighty, I'm short on time now, but here's what I did in very quick words:
R33 calipers
GTR Vspec (320something MM) rotors
UZS131 Crown hubs, machined down externally, different bearings, NASCAR studs (looooong!)
Made some caliper adapter brackets, because the larger rotor needed the calipers in a different place, however if you use the 297mm rotors, you only need a small spacer, the bolt holes line up and the offset is correct. This is with RA60 struts, though!
I also adapted an MX83 master cylinder to the AE86 booster.
Total cost ~$700 including new rotors, then later $200ish more for greenstuff pads
Sorry to be so short on details, but I haven't got a heap of time right now! I'll try and take some photos though...
|
|
|
