| Author | Topic |
|---|
Location:
Eskilstuna, Sweden
Registered:
May 2002
|
|
Re: torque setting for 4AGZE head bolts?
|
Sun, 08 September 2002 18:55
 
|
 |
I'm not sure about the tighten to setting then plus 90, as once you have tightened to the right torque setting (with torque wrench) there is no need to go anymore.
On the 4age/ze head the exhaust side head bolts are 4.25 inches long and on the intake they are 3.45 inches long
the sequnce of tightening looks like this
front of car/engine on the left
8,4,2,5,9
10,6,1,3,7
They need to be set to 44 Ft-lbs
Hope that helps
[Updated on: Sun, 08 September 2002 18:56]
|
|
|
