| Author | Topic |
|---|
I supported Toymods
Location:
Perth, Western Australia
Registered:
December 2002
|
|
Re: ke55 front brake + rear diff conversion
|
Wed, 26 May 2004 01:51
 
|
 |
RA60's run a different stub axle angle compared to earlier model Toyotas including your Corolla, which results in positive camber problems, I'd suggest doing the Corona strut swap with the modified vented brake setup, as has been described and documented previously on Toymods, if you definately want vented discs on the front. you'll also have to pay attention to your lower spring perch as they won't fit in your Corolla strut tower.
Diff wise, no T series will bolt in there - you're up for modification costs. You may be lucky and get a TA/RA23/28 diff in there, they are only 1365mm, mounting face to mounting face, but you're still up for fitment modifications. If you want to go to a three or five link style rear end with coils, look at Bill Sherwood's homepage, he's doing this as we speak, but it won't be cheap!
Clint
|
|
|
