| Author | Topic |
|---|
I supported Toymods
Location:
Sunshine Coast
Registered:
March 2004
|
|
Re: replacing sump gasket on 3sfe
|
Fri, 28 May 2004 11:53
 
|
 |
dude drive your car up on some ramps, take the cross member out etc and put all nuts and bolts in a bucket..the engine will ballance on the 2 side ones it is fine, MAKE SURE U DRAIN OIL FIRST befor takeing the bolts out..u empty it by taking that huge nut from the bottom out and putting a bucket under it, replace the gasket and screw the sump back in and just reverse evertyhing u did..then put the oil back in and there ya go 
hope this helps
in my oppionion it is safe to take the front one off
good luck
|
|
|
