| Author | Topic |
|---|
Location:
Brisbane
Registered:
February 2003
|
|
Re: MA61-5ME won't start
|
Sun, 30 May 2004 10:09
 
|
 |
i pulled plug on inj 5 - test lamp lit up when ign power applied
but both pins did - due to being hooked up for batch fire?
was going to check resistance of both inj lines at ECU?
seeing as ECU provides ground to inj's, it should go from hi-ish Z to no Z as it triggers? or will that happen too fast at cranking for my lowly (v.cheap) multimeter?
i'm also going to try wilbo's spare ECU, recheck the plugs, check the fuel filter and check flow at return line. if no joy, then mobile mech.
my spare injectors are 1G so the plug pattern is different - otherwise, i'd hook up on to see if is actually triggering injectors.
|
|
|
