| Author | Topic |
|---|
Banned user
Location:
ADELAIDE - The Drift City
Registered:
July 2002
|
|
Major problem with starting - please help
|
Mon, 31 May 2004 13:00
|
 |
Ok, i dropped a 4age with loom into a stock aust spec ae86, it had the old 4ac in it, Dropped in engine loom ecu etc etc, Wired it all up and started it, noticed some issues with the starter switch and thought switch was dodgy. As in the switch would leave the starter engaged while it was running, u had to carefully move the switch back and it would run as normal, move backl too far and it would die (but switch was still in the on position)
following me so far? so the car was running and driveable, drove ti with no worries at all.
Anyway the next day the owner of the car could not get it going at all. it would start/fire but as soon as u release the pressure on the key from the starting position, it would die (even tho its in the on position)
so i told him to go get another ignition switch, did that, installed and no luck whatso ever.
Car HAS run with this wiring set up so its doubtful that ive made a wiring error. Fuses and relays all checked.
|
|
|
