F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Scratched shim? bores - 2jzge head Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
YelloRolla Forums Junkie Location: On your mum! Registered: May 2002	Re: Scratched shim? bores - 2jzge head Tue, 01 June 2004 07:13 I am assuming that you are referring to the lifter bores? I would just scrape the high points and give them a polish with very fine steel wool (NOT scotchbrite). A little WD40 with the steel wool is good too. I can lend you a scraper if you like (for this I would use a tri-angular scraper). [Report message to a moderator]

	Subject	Poster	Date
	Scratched shim? bores - 2jzge head	BlackSupra	Tue, 01 June 2004 07:02
	Re: Scratched shim? bores - 2jzge head	YelloRolla	Tue, 01 June 2004 07:13
	Re: Scratched shim? bores - 2jzge head	ed_ma61	Tue, 01 June 2004 07:17
	Re: Scratched shim? bores - 2jzge head	YelloRolla	Tue, 01 June 2004 07:24
	Re: Scratched lifter bores - 2jzge head	BlackSupra	Tue, 01 June 2004 07:24
	Re: Scratched lifter bores - 2jzge head	gianttomato	Tue, 01 June 2004 07:28
	Re: Scratched shim? bores - 2jzge head	THE WITZL	Tue, 01 June 2004 07:42
	Re: Scratched shim? bores - 2jzge head	BlackSupra	Tue, 01 June 2004 08:44
	Re: Scratched shim? bores - 2jzge head	justcallmefrank	Tue, 01 June 2004 08:55
	Re: Scratched shim? bores - 2jzge head	BlackSupra	Tue, 01 June 2004 09:00

Previous Topic:	piggy back ecu's on turbo bluetop 4age?
Next Topic:	Heavy Duty cv joints

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.