F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Scratched shim? bores - 2jzge head Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
ed_ma61 Forums Junkie Location: Lost in the K hole Registered: May 2002	Re: Scratched shim? bores - 2jzge head Tue, 01 June 2004 07:17 depends how deep and how bad. scratches typically are only 'depressions' in the bore wall, and itll fill up with oil and have no consequence. its the high points next to the scratch that cause problems with gauling and wear etc. you can buff the high points down and everything will be fine. a GOUGE as opposed to a 'scratch' however, will distort the bore more significantly, and thus render that bore useless untill remachined, ground, buffed etc. i wouldnt be THAT worried about it... some 600grit (rubbed back on itself with wd40) and some cutting paste should fix it ok. PICS?? cheers ed [Updated on: Tue, 01 June 2004 07:18] [Report message to a moderator]

	Subject	Poster	Date
	Scratched shim? bores - 2jzge head	BlackSupra	Tue, 01 June 2004 07:02
	Re: Scratched shim? bores - 2jzge head	YelloRolla	Tue, 01 June 2004 07:13
	Re: Scratched shim? bores - 2jzge head	ed_ma61	Tue, 01 June 2004 07:17
	Re: Scratched shim? bores - 2jzge head	YelloRolla	Tue, 01 June 2004 07:24
	Re: Scratched lifter bores - 2jzge head	BlackSupra	Tue, 01 June 2004 07:24
	Re: Scratched lifter bores - 2jzge head	gianttomato	Tue, 01 June 2004 07:28
	Re: Scratched shim? bores - 2jzge head	THE WITZL	Tue, 01 June 2004 07:42
	Re: Scratched shim? bores - 2jzge head	BlackSupra	Tue, 01 June 2004 08:44
	Re: Scratched shim? bores - 2jzge head	justcallmefrank	Tue, 01 June 2004 08:55
	Re: Scratched shim? bores - 2jzge head	BlackSupra	Tue, 01 June 2004 09:00

Previous Topic:	piggy back ecu's on turbo bluetop 4age?
Next Topic:	Heavy Duty cv joints

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.