F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 2jz Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
gianttomato Forums Junkie I supported Toymods Location: I renounced punctuation Registered: May 2002	Re: 2jz Tue, 01 June 2004 10:02 You'll need to check the specifics of the final compression ratio with someone who has actually done it. I haven't so I can't be sure. I know the head chamber capacity of a 2JZGE head is approx 42cc (and this results in a 10:1 CR) - if the 1JZGTE HCC is the same then you'll need the thicker head gasket. Maybe someone has measured this for a 1JZ? I suspect most people are putting 1JZGTE heads on 2JZGTE bottom ends to make a 1.5JZ and hence don't run into any problems with compression. You would just use the 1JZ crank angle sensor. The std 2JZGE oil pump doesn't have the recess for the sensor. I think that is what that quote you posted is getting at. EDIT: just so it is clear for you - the non VVTi 2JZGE runs a dizzy and has no specific crank angle sensor - this is why you need to run the GTE oil pump and crank angle sensor. The VVTi 2JZGE does not have a dizzy and does run a crank angle sensor. [Updated on: Tue, 01 June 2004 10:10] [Report message to a moderator]

	Subject	Poster	Date
	2jz	CrispyFries	Fri, 01 August 2003 05:00
	Re: 2jz	Simon-AE86	Fri, 01 August 2003 05:51
	Re: 2jz	gianttomato	Fri, 01 August 2003 08:13
	Re: 2jz	Chris Davey	Mon, 31 May 2004 22:08
	Re: 2jz	gianttomato	Mon, 31 May 2004 23:05
	Re: 2jz	Chris Davey	Tue, 01 June 2004 08:13
	Re: 2jz	gianttomato	Tue, 01 June 2004 08:35
	Re: 2jz	Chris Davey	Tue, 01 June 2004 09:24
	Re: 2jz	Chris Davey	Tue, 01 June 2004 09:43
	Re: 2jz	gianttomato	Tue, 01 June 2004 10:02
	Re: 2jz	Chris Davey	Tue, 01 June 2004 10:11
	Re: 2jz	gianttomato	Tue, 01 June 2004 10:22
	Re: 2jz	Chris Davey	Tue, 01 June 2004 10:25
	Re: 2jz	gianttomato	Tue, 01 June 2004 10:41
	Re: 2jz	Manny	Tue, 01 June 2004 11:21
	Re: 2jz	gianttomato	Wed, 02 June 2004 10:07
	Re: 2jz	Chris Davey	Thu, 03 June 2004 03:31
	Re: 2jz	ed_ma61	Thu, 03 June 2004 03:38
	Re: 2jz	Chris Davey	Thu, 03 June 2004 03:35
	Re: 2jz	ed_ma61	Thu, 03 June 2004 03:36
	Re: 2jz	Chris Davey	Thu, 03 June 2004 03:39
	Re: 2jz	gianttomato	Thu, 03 June 2004 06:42
	Re: 2jz	ed_ma61	Thu, 03 June 2004 07:50
	Re: 2jz	gianttomato	Thu, 03 June 2004 09:41
	Re: 2jz	Manny	Thu, 03 June 2004 10:39
	Re: 2jz	gianttomato	Thu, 03 June 2004 10:49

Previous Topic:	Genuine Valve Stem Seals - $187.44 - should i go aftermarket?
Next Topic:	special deatils when changing 18RG head

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.