F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 2jz Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
gianttomato Forums Junkie I supported Toymods Location: I renounced punctuation Registered: May 2002	Re: 2jz Tue, 01 June 2004 10:22 Yep if the head chamber capacity* is 42 cc, then your CR will be 10:1. I calculated for someone else a few days ago that a 2mm head gasket would drop CR to around 8.7:1. I honestly can't be bothered doing the calcs again for a 3mm HG (particularly on an empty stomach)...I'll see how I feel after dinner. * By head chamber capacity, I specifically mean the volume within the head. All you need to do is find a 1JZGTE head, get a small sheet of perspex, drill 2 holes (one to let out air and one to fill). Seal the chamber with the perspex sheet (use some Vaseline), then using a burette or a syringe, fill up the chamber (just use some colored water but be sure to dry thoroughly and hit it with some WD40 when you are done). When it is full, that is the head chamber capacity. [Report message to a moderator]

	Subject	Poster	Date
	2jz	CrispyFries	Fri, 01 August 2003 05:00
	Re: 2jz	Simon-AE86	Fri, 01 August 2003 05:51
	Re: 2jz	gianttomato	Fri, 01 August 2003 08:13
	Re: 2jz	Chris Davey	Mon, 31 May 2004 22:08
	Re: 2jz	gianttomato	Mon, 31 May 2004 23:05
	Re: 2jz	Chris Davey	Tue, 01 June 2004 08:13
	Re: 2jz	gianttomato	Tue, 01 June 2004 08:35
	Re: 2jz	Chris Davey	Tue, 01 June 2004 09:24
	Re: 2jz	Chris Davey	Tue, 01 June 2004 09:43
	Re: 2jz	gianttomato	Tue, 01 June 2004 10:02
	Re: 2jz	Chris Davey	Tue, 01 June 2004 10:11
	Re: 2jz	gianttomato	Tue, 01 June 2004 10:22
	Re: 2jz	Chris Davey	Tue, 01 June 2004 10:25
	Re: 2jz	gianttomato	Tue, 01 June 2004 10:41
	Re: 2jz	Manny	Tue, 01 June 2004 11:21
	Re: 2jz	gianttomato	Wed, 02 June 2004 10:07
	Re: 2jz	Chris Davey	Thu, 03 June 2004 03:31
	Re: 2jz	ed_ma61	Thu, 03 June 2004 03:38
	Re: 2jz	Chris Davey	Thu, 03 June 2004 03:35
	Re: 2jz	ed_ma61	Thu, 03 June 2004 03:36
	Re: 2jz	Chris Davey	Thu, 03 June 2004 03:39
	Re: 2jz	gianttomato	Thu, 03 June 2004 06:42
	Re: 2jz	ed_ma61	Thu, 03 June 2004 07:50
	Re: 2jz	gianttomato	Thu, 03 June 2004 09:41
	Re: 2jz	Manny	Thu, 03 June 2004 10:39
	Re: 2jz	gianttomato	Thu, 03 June 2004 10:49

Previous Topic:	Genuine Valve Stem Seals - $187.44 - should i go aftermarket?
Next Topic:	special deatils when changing 18RG head

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.