| Author | Topic |
|---|
Registered:
May 2002
|
|
Re: Gear Box for 1G-GE in RA28
|
Wed, 11 September 2002 10:48
 
|
 |
But don't forget you're arms will be short too!!
Do you have a gearbox that will bolt up to a g engine?? If no thten you don't really have much of a choice but to ring around and see what wreckers have got! You'll pay through the nose though.
The gearbox crossmember fit best when you have a stock auto transmission crossmember. then you just have to weld some tabs on with holes in them.
Be careful when choosing thermofan and intercooler plumbing, it gets damn tight!! I managed to get all the steel plates on the front bumper back on but the grill is about 1/2 an inch further forward. I believe Dylo got everything to fit perfect.
Also, the fuel system is a bitch, ended costing me about 600 bucks.
Good luck!!
Tim.
|
|
|
| | Subject | Poster | Date |
|---|
 |
Gear Box for 1G-GE in RA28
|
RA28midge | Tue, 10 September 2002 01:42 |
|
Re: Gear Box for 1G-GE in RA28
|
Nark | Tue, 10 September 2002 04:53 |
|
Re: Gear Box for 1G-GE in RA28
|
blackRA28 | Tue, 10 September 2002 05:14 |
|
Re: Gear Box for 1G-GE in RA28
|
RA28midge | Tue, 10 September 2002 05:55 |
|
Re: Gear Box for 1G-GE in RA28
|
Norbie | Tue, 10 September 2002 06:01 |
|
Re: Gear Box for 1G-GE in RA28
|
ddeane | Tue, 10 September 2002 22:11 |
|
Re: Gear Box for 1G-GE in RA28
|
rob_RA40 | Tue, 10 September 2002 09:13 |
|
Re: Gear Box for 1G-GE in RA28
|
RA28 | Tue, 10 September 2002 11:04 |
|
Re: Gear Box for 1G-GE in RA28
|
RA28midge | Tue, 10 September 2002 23:43 |
|
Re: Gear Box for 1G-GE in RA28
|
RA28 | Wed, 11 September 2002 10:48 |
|
Re: Gear Box for 1G-GE in RA28
|
Nark | Wed, 11 September 2002 23:36 |
|
Re: Gear Box for 1G-GE in RA28
|
Norbie | Thu, 12 September 2002 02:48 |
|
Re: Gear Box for 1G-GE in RA28
|
THE WITZL | Thu, 12 September 2002 04:19 |
|
Re: Gear Box for 1G-GE in RA28
|
RA28midge | Thu, 12 September 2002 06:11 |
