F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » st185 injectors into st162 Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
RWDboy Forums Junkie Location: South Australia Registered: July 2002	Re: st185 injectors into st162 Mon, 07 June 2004 06:51 I'll state this again, if you want to use bigger injectors (ie more fuel and more kW), you will need to start by flowing more air. If you use bigger (turbo sized) injectors with standard amount of air flow, you will probably get a drop in performance due to worse atomisation at the lower air flow. (the air gets saturated quicker because it is colder, and there is less air mass for the fuel to atomise in etc etc) Fuel is only half of the equation...air is usually the more important half You would have to be flowing quite a bit of air to require larger injectors than the factory ones. [Report message to a moderator]

	Subject	Poster	Date
	st185 injectors into st162	dar_sbb	Mon, 07 June 2004 02:07
	Re: st185 injectors into st162	Classique71	Mon, 07 June 2004 02:32
	Re: st185 injectors into st162	RWDboy	Mon, 07 June 2004 06:51
	Re: st185 injectors into st162	TA22-3SGTE	Mon, 07 June 2004 09:55
	Re: st185 injectors into st162	RWDboy	Mon, 07 June 2004 12:30
	Re: st185 injectors into st162	RWDboy	Tue, 08 June 2004 02:17
	Re: st185 injectors into st162	TA22-3SGTE	Mon, 07 June 2004 13:53
	Re: st185 injectors into st162	RWDboy	Mon, 07 June 2004 15:20
	Re: st185 injectors into st162	oldcorollas	Mon, 07 June 2004 15:31
	Re: st185 injectors into st162	dar_sbb	Tue, 08 June 2004 02:10

Previous Topic:	removing 2JZ cam pulleys!!
Next Topic:	4age problem....wheres all the power??

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.