| Author | Topic |
|---|
Location:
Melbourne
Registered:
October 2003
|
|
Re: wolf 3d iginition pulse problems
|
Mon, 07 June 2004 09:45
 
|
 |
thanks for the info guys, it's a V4.
This signal error continues after the engine is on.
sometimes i also get a problem with it not firing until i let go of the starter, and if i'm lucky there's enought momentum in the engine to let it start.. But since a new battery it has been better. (similar to when your starter and igniton are not on the same circuit) - -but they are.. pretty sure thats a voltage prob.
All earths and positives are straigh to the battery with good volatage. The only thing i can think of is that i use blade terminals to connect the signal wires from the dizzy to have the flexability of removing the dizzy w/o chopping wires.. Is this
sufficent to cause interferance as these clips are not shielded?
When it does do it's weird thing, the RPM displayed is at least double that of what it sounds the motor is at, thus the wolf is recieving double input pulses, and sending double sparks, makeing the motor sound weird. If a rev the motor up a bit, and
get past the 'wall' it goes away... weird..
I'll keep tinkering, ill try chaning pickup gap, and play with the signal strenth pickup.
Thanks for your help guys.
|
|
|
| | Subject | Poster | Date |
|---|
 |
wolf 3d iginition pulse problems
|
hemi twofifteen turbo | Mon, 07 June 2004 04:46 |
|
Re: wolf 3d iginition pulse problems
|
IRA11Y | Mon, 07 June 2004 05:05 |
|
Re: wolf 3d iginition pulse problems
|
YelloRolla | Mon, 07 June 2004 06:33 |
|
Re: wolf 3d iginition pulse problems
|
IRA11Y | Mon, 07 June 2004 06:49 |
|
Re: wolf 3d iginition pulse problems
|
YelloRolla | Mon, 07 June 2004 06:59 |
|
Re: wolf 3d iginition pulse problems
|
IRA11Y | Mon, 07 June 2004 07:02 |
|
Re: wolf 3d iginition pulse problems
|
hemi twofifteen turbo | Mon, 07 June 2004 09:45 |
|
Re: wolf 3d iginition pulse problems
|
celicaboy_2000 | Mon, 07 June 2004 09:59 |
|
Re: wolf 3d iginition pulse problems
|
IRA11Y | Mon, 07 June 2004 10:50 |
|
Re: wolf 3d iginition pulse problems
|
sebta22 | Mon, 25 April 2005 10:37 |
