F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 3tgte? Power out put? Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
DVS_ONE Regular Location: Sydney Registered: May 2003	Re: 3tgte? Power out put? Mon, 07 June 2004 22:37 YelloRolla wrote on Mon, 07 June 2004 16:50 I killed a standard piston with 20PSI through the CT26. I would not "NOT" assemble one of these engines for more than about 15PSI with stock pistons (we did run a bit more with the CT20 and the stockers although it is a piss weak little pump). I reckon that 200rwkW is a very short lived engine if it is on stock pistons. Power figure before we broke the stock unit was 220rwhp at about 5000rpm. Std bottom end with forged pistons - who knows? They have potential then? [Report message to a moderator]

	Subject	Poster	Date
	3tgte? Power out put?	DVS_ONE	Mon, 07 June 2004 03:27
	Re: 3tgte? Power out put?	Norbie	Mon, 07 June 2004 03:49
	Re: 3tgte? Power out put?	TA22 GT	Mon, 07 June 2004 03:52
	Re: 3tgte? Power out put?	DVS_ONE	Mon, 07 June 2004 04:38
	Re: 3tgte? Power out put?	3T-GTE	Mon, 07 June 2004 04:58
	Re: 3tgte? Power out put?	YelloRolla	Mon, 07 June 2004 06:50
	Re: 3tgte? Power out put?	DVS_ONE	Mon, 07 June 2004 22:37
	Re: 3tgte? Power out put?	YelloRolla	Mon, 07 June 2004 22:44

Previous Topic:	upgrades for solid axle t series
Next Topic:	springs for ae86 setup

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.