Toymods Car Club Inc: Tech & Conversions => 100kw 4age for turbo conversion

Toymods Car Club
www.toymods.org.au

Toymods » Tech & Conversions » 100kw 4age for turbo conversion Show: Today's Posts :: Show Polls Email to friend

Author

Topic

oldcorollas
Forums Junkie

Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003

Re: 100kw 4age for turbo conversion	Tue, 08 June 2004 05:28

the 'pressure' produced by a turbo is a measure of the amount of air NOT getting into an engine. the power output of an engine is (disregarding mechanical losses) a measure of the FLOW of the engine and turbo put together. if the turbo flows 100kw, then thats what it does.. putting it onto an engine with beter flow will not make the turbo push any more air.. it will push the same amount of air but at a lower pressure (since not as much pressure is needed to get that much air into the motor) all you need to do is look at the amount of air the turbo flows at the upper end of it's good efficiency region, and that is how much power you can possibly expect from the turbo.. if this TX3 one can push more than 100kw,m then it might work. if 100kw is it's limit, then you will get better midrange on a 4AG, but the upper end will still be a little over 100kw (without overspeeding turbo or pushing it into poor efficiency) that make any sense? Cya, Stewart [Report message to a moderator]

Current Time: Mon Jan 6 20:38:24 UTC 2025

Total time taken to generate the page: 0.0064182281494141 seconds

.:: Contact :: Home ::.