| Author | Topic |
|---|
Location:
S.E suberbs, Vic
Registered:
December 2003
|
|
Re: help with Ae-86 flasher can problem
|
Tue, 08 June 2004 07:36
 
|
 |
heres my car:
I made the indicators from scratch, I cheated too they are just 15mm thick peices of perspex! What I did is drilled 4 10mm holes through the sides and superglued 10mm orange LEDs in. The LEDs are 10,000Mcd from Jaycar. At night these are awesome during the day they are still very visable but its possible to see that its lit by 4 LEDs. At the time the only LEDs I saw being available in a high intensity in orange was those, however since then I bought a pack of 50 x 5mm at 5000mcd each off ebay for bugger all money. I will make a second set when I could be stuffed. So in due time I think I will sell this set. As for the difused effect I just sanded the perspex face and sprayed the back and sides silver, too easy and looks good even close up. If you have any other questions feel free to ask.
If I made more of those do you guys think I could sell them for like $20 to $30 each?
|
|
|
