| Author | Topic |
|---|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
Re: help with 4a-fe engine
|
Wed, 09 June 2004 04:39
 
|
 |
well he said | Quote: |
i just have a few bolt ons nothing on the engine yet
|
i agree on a worked motor they might require some thing more..
fwiw, a 1.3L going to 8000-9000 needs something like a 45mm TB (from my calculations and the suzuki 1.3L rally boys) (actually i calculated 43mm)
so for 1.6L, about 48mm would be good. a bit extra and 55mm should be sufficient?
55mm at 300ft/s = 475CFM ....
maximum a 1.6L will consume (@8000rpm) is 237CFM.
with 55mm throttle = 150ft/sec....
will the stock TB restrict a STOCK motor (with bolt ons)??
Cya, Stewart
|
|
|
| | Subject | Poster | Date |
|---|
 |
help with 4a-fe engine
|
trdae92 | Tue, 08 June 2004 21:16 |
|
Re: help with 4a-fe engine
|
Johnny | Wed, 09 June 2004 01:59 |
|
Re: help with 4a-fe engine
|
mrshin | Wed, 09 June 2004 03:09 |
|
Re: help with 4a-fe engine
|
trdae92 | Wed, 09 June 2004 03:13 |
|
Re: help with 4a-fe engine
|
Johnny | Wed, 09 June 2004 03:49 |
|
Re: help with 4a-fe engine
|
trdae92 | Wed, 09 June 2004 03:52 |
|
Re: help with 4a-fe engine
|
oldcorollas | Wed, 09 June 2004 03:55 |
|
Re: help with 4a-fe engine
|
Johnny | Wed, 09 June 2004 04:23 |
|
Re: help with 4a-fe engine
|
oldcorollas | Wed, 09 June 2004 04:39 |
|
Re: help with 4a-fe engine
|
DiZ_ | Wed, 09 June 2004 09:36 |
|
Re: help with 4a-fe engine
|
Johnny | Thu, 10 June 2004 01:32 |
