| Author | Topic |
|---|
Location:
Brisbane
Registered:
May 2002
|
|
Re: bellhousing/clutch cost
|
Wed, 09 June 2004 07:01
 
|
 |
Also another thing to bear in mind, if you are putting it behind a 7mgte is the flywheel size. I believe that 2 different flywheel sizes came out behind M series motors connected to W5X geraboxes (not R154's), one taking a 225mm clutch palte and one a 236mm/240mm clutch plate.
The 5M-E's had the 225mm clutch plate one the 5MGE/7MGE's got a 236mm/240mm clutch plate.
With a 7mgte I'd try and get the larger flywheel if possible to make clutch and pressure plate selection easier.
Thread on it was here
That price does sound a bit steep too.
Cheers
Wilbo
|
|
|
