| Author | Topic |
|---|
I supported Toymods
Location:
Perth
Registered:
October 2003
|
|
Re: Dodgy tacho and instruments
|
Sun, 13 June 2004 14:23
 
|
 |
the search button usually helps...
http://forums.toymods.org.au/index.php?t=msg&t h=34629&rid=3968&S=473a6c2966eca24df051d7f 4228ba7d9&pl_view=&start=0#msg_305225
You start with taking of the switch covers, then the nuts, then the bolts from the dash 3 under near tacho and ometer, and 1 either side down the bottom, covered by speaker cover on rigfht and next to some interior on the left, drop the wheel, pull it out. Take out the switch, unplug it, clean up the contact parts, and solder ever little bit on the circut board inside the switch. put back together and reverse steps.
|
|
|
