| Author | Topic |
|---|
On Probation
Location:
North East NSW
Registered:
December 2002
|
|
Re: KE25 Engine Conversion - 4k to 2tg!! How Easy
|
Wed, 16 June 2004 12:33
 
|
 |
http://www.geocities.com/jonnyr_1973/
but that's for ke30/55 2T conversion
the ke20-series KE and TE chassis manual i have does not differentiate between KE2x and TE2x engine crossmembers, perhaps they are the same? the ke30-series chassis manual does differentiate and gives dimensions
i would be inclined to get a 2t and some ta22 engine mounts and see if it all just bolts up? if you can weld, you can easily make custom mounts out of existing mount metal and escort/cortina rubbers (rubber disc with bolt thread on each side)
you'll need to bolt the gearbox crossmember into the chassis rails in the holes 80mm back from the ones the K gearbox is in, you might have you drill out the hole(s) in the crossmember to get the gearbox bolts to fit
some people think a T motor in a KE corolla makes the front too heavy. unless you have the motor already, perhaps consider a 4ag or rotary instead, much lighter
|
|
|
