| Author | Topic |
|---|
Location:
Christchurch, New Zealand
Registered:
March 2004
|
|
Re: 3T-GTE rebuild
|
Thu, 17 June 2004 00:23
 
|
 |
Mains are identical, big ends are not, try shopping around to find the right bigend bearings which are different to all other tseries (because of oiling hole). I managed to find 10 thou over 3tgteu bigend bearings from a local supplier for $35NZ retail. was a stock item.
<quote>
Buy bearings to suit 3T-C they are identical - try Pittwater Brake and Clutch for these (ask for phill or matt).
Be careful with the hole placement on the conrod bearings - they are generally in the wrong spot and they will need re-drilling to match the rods.
|
|
|
