F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 2T Choke issues Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
fade-e Forums Junkie Location: Sydney Registered: June 2004	Re: 2T Where does the choke hook up to? Thu, 17 June 2004 07:19 if standing nexst to car on carby side, then on the back of the carby (would be left side) there is the choke (from what i have seen they are always block plastic cover)... you will see a place on the choke to screw the pipe to. that then goes to the exhaust manifold... temp is water... where the heater pipe goes (front passenger side of motor) there is a connector for the temp... to know the difference if water temp or oil temp on car you look at the little pic on guage... if looks like oil can then there you go, otherwise the other pic (to me) looks like a thermometer in water hope this helps you [Report message to a moderator]

	Subject	Poster	Date
	2T Choke issues	TA-022	Wed, 16 June 2004 13:20
	Re: 2T Where does the choke hook up to?	alex_ta22	Thu, 17 June 2004 07:10
	Re: 2T Where does the choke hook up to?	fade-e	Thu, 17 June 2004 07:19
	Re: 2T Where does the choke hook up to?	TA-022	Thu, 17 June 2004 09:37
	Re: 2T Choke issues	TA-022	Wed, 14 July 2004 11:35
	Re: 2T Choke issues	fade-e	Wed, 14 July 2004 18:30
	Re: 2T Choke issues	fade-e	Wed, 14 July 2004 18:51
	Re: 2T Choke issues	TA-022	Thu, 15 July 2004 11:23
	Re: 2T Choke issues	fade-e	Thu, 15 July 2004 13:36
	Re: 2T Choke issues	Classique71	Fri, 16 July 2004 02:24
	Re: 2T Choke issues	fade-e	Fri, 16 July 2004 02:33
	Re: 2T Choke issues	Classique71	Fri, 16 July 2004 02:47
	Re: 2T Choke issues	greenta22	Sun, 18 July 2004 11:45
	Re: 2T Choke issues	Classique71	Mon, 19 July 2004 02:42

Previous Topic:	1UZ-FE Wiring Diagrams
Next Topic:	Heat Shielding......

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.