AE82 3/4AC carby isnt to hard..
the 4AGE will bolt on exactly.. the gearbox with the gze will need some welding? but some people still use a standard GE gearbox with a gze..
Half cut will do you the engine bit.. you still need the fuel tank+pump+lines(probably best but not really required) this is the stuff you normaly wont get from a half cut.. and will set you back $250-300
the wiring is pretty easy.. you dont need anything cut or remade.. just take out the whole front dash/steering wheel pieces.. take out the old loom.. run the loom from the engine through a hole to the ecu (you can place this behind the bin/aircon area) the chassis loom needs to be done at the same time.. the engine wiring is pretty much the time.. just 2 wires need to be customised.. one from the battery to the coil.. but when you get your front cut.. its possible to use the front bonnet/engine wiring but.. its alot of work =p
ripping of panels and making it look neat..
Sat, 14 September 2002 04:10
