F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Cam belt covers Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
JIMMYD Occasional Poster Location: Cairns Registered: May 2002	Re: Cam belt covers Sun, 15 September 2002 23:33 Non interference design IF standard profile cams, block heights, head thickness,etc. Think about it, increase cam lift = more valve protrusion into chamber, deck the block = higher relative piston position, shave head = more valve protrusion. Just something to keep in mind. I have broken an timing belt on a noninterference engine at high RPM. Guess what happened..... [Report message to a moderator]

	Subject	Poster	Date
	Cam belt covers	Dylo	Wed, 11 September 2002 15:00
	Re: Cam belt covers	jazae86	Wed, 11 September 2002 16:08
	Re: Cam belt covers	Bill Sherwood	Wed, 11 September 2002 23:41
	Re: Cam belt covers	JIMMYD	Thu, 12 September 2002 23:25
	Re: Cam belt covers	rollaboy	Thu, 12 September 2002 23:40
	Re: Cam belt covers	Corolla Boy	Sat, 14 September 2002 10:35
	Re: Cam belt covers	TCHOON	Sat, 14 September 2002 11:18
	Re: Cam belt covers	Corolla Boy	Sat, 14 September 2002 12:01
	Re: Cam belt covers	Bill Sherwood	Sat, 14 September 2002 11:31
	Re: Cam belt covers	Corolla Boy	Sat, 14 September 2002 11:59
	Re: Cam belt covers	Norbie	Sat, 14 September 2002 13:23
	Re: Cam belt covers	Corolla Boy	Sat, 14 September 2002 13:40
	Re: Cam belt covers	JIMMYD	Sun, 15 September 2002 23:33
	Re: Cam belt covers	rob_RA40	Sat, 14 September 2002 13:34

Previous Topic:	Wheel spacers for JZA80??
Next Topic:	sprinter gearboxs

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.