| Author | Topic |
|---|
Location:
Newcastle
Registered:
May 2002
|
|
Re: RA28 seatbelts after Honda seat conv.
|
Mon, 16 September 2002 00:47
 
|
 |
Hi Joel,
had the same prob with my prelude seats...
there is a set of mounting points under the carpet on your transmission tunnel.....
How high are you seats? heaps higher than the orig?
also you will find that the socket end will be had to reach with the stock 28 socket....
i changed mine for some out of an ra40... these are much longer and suit much better. if you do this you also have to change the plug end on your seat belt. it was easy enough to get the ra28 one off, but the ra40 had to have some of the plastic romoved from the inside of the hole to get it on to the ra28 belt....
any more q's, just ask...
Good luck.
Stew
|
|
|
