| Author | Topic |
|---|
Location:
Syndey
Registered:
December 2002
|
|
Re: Would Wolf3D be good to use on 20 Valve
|
Wed, 23 June 2004 05:55
|
 |
| oldcorollas wrote on Wed, 23 June 2004 02:42 |
oh god, running most motors in alpha-N mode (TPS only) is a pretty suckful way of doing things..
even if you have shitty vacuum, if you set the MAP axis points correctly, then it will be foine...
case in point, alfa 2L, idle MAP was 75kpa (absolute), MAP axis set in 3kpa increments up to 95kpa, runs perfectly.
for those ECU's with fixed 'load points' makes it a bit more tricky, as with a 75kpa MAP leaves you only 3 or 4 load points to tune with
you should be running off the MAP sensor for the load sensing, and using the TPS for accel and decell only...
Dale, what sort of torque are your 20V's making? (flywheel)
Cya, Stewart
|
id have to have a look at the sheets mate, all will be torque at the wheels tho,
i have done about 8 20v's now and all have made between 91 and 95kw NA and 135kw on 8psi with a turbo and drive like a factory car.
Dale
|
|
|
| | Subject | Poster | Date |
|---|
 |
Would Wolf3D be good to use on 20 Valve
|
2DVIOS | Wed, 03 December 2003 07:53 |
|
Re: Would Wolf3D be good to use on 20 Valve
|
10sec_rx7 | Wed, 03 December 2003 21:51 |
|
Re: Would Wolf3D be good to use on 20 Valve
|
._T_. | Wed, 03 December 2003 21:53 |
|
Re: Would Wolf3D be good to use on 20 Valve
|
86twinky | Wed, 03 December 2003 22:08 |
|
Re: Would Wolf3D be good to use on 20 Valve
|
onejayzed | Thu, 04 December 2003 03:01 |
|
Re: Would Wolf3D be good to use on 20 Valve
|
10sec_rx7 | Thu, 04 December 2003 05:25 |
|
Re: Would Wolf3D be good to use on 20 Valve
|
86twinky | Thu, 04 December 2003 03:09 |
|
Re: Would Wolf3D be good to use on 20 Valve
|
CrUZsida | Thu, 04 December 2003 03:46 |
|
Re: Would Wolf3D be good to use on 20 Valve
|
Johnny | Thu, 04 December 2003 04:20 |
|
Re: Would Wolf3D be good to use on 20 Valve
|
CrUZsida | Thu, 04 December 2003 04:24 |
|
Re: Would Wolf3D be good to use on 20 Valve
|
Johnny | Fri, 05 December 2003 04:29 |
|
Re: Would Wolf3D be good to use on 20 Valve
|
onejayzed | Thu, 04 December 2003 05:50 |
|
Re: Would Wolf3D be good to use on 20 Valve
|
86twinky | Thu, 04 December 2003 04:15 |
|
Re: Would Wolf3D be good to use on 20 Valve
|
86twinky | Thu, 04 December 2003 04:54 |
|
Re: Would Wolf3D be good to use on 20 Valve
|
CrUZsida | Thu, 04 December 2003 05:21 |
|
Re: Would Wolf3D be good to use on 20 Valve
|
86twinky | Thu, 04 December 2003 05:37 |
|
Re: Would Wolf3D be good to use on 20 Valve
|
10sec_rx7 | Thu, 04 December 2003 09:51 |
|
Re: Would Wolf3D be good to use on 20 Valve
|
CrUZsida | Fri, 05 December 2003 05:50 |
|
Re: Would Wolf3D be good to use on 20 Valve
|
spoon33 | Tue, 22 June 2004 12:12 |
|
Re: Would Wolf3D be good to use on 20 Valve
|
oldcorollas | Tue, 22 June 2004 16:42 |
|
Re: Would Wolf3D be good to use on 20 Valve
|
IRA11Y | Tue, 22 June 2004 23:13 |
|
Re: Would Wolf3D be good to use on 20 Valve
|
10sec_rx7 | Wed, 23 June 2004 05:55 |
