| Author | Topic |
|---|
Location:
Brisbane
Registered:
October 2002
|
|
Re: whart would u call lumpy cams
|
Wed, 23 June 2004 08:58
 
|
 |
well as far as i can remember the 18RG has about 10.5mm std
details of my cams
Surecam grind number B-12Z-6
lift: .465"{11.8mm} ex: .465 {.455 net}
max lift is at 102deg for intake and 110deg for exhaust {what does that mean  }
duration at .050" 233deg for ex and in
duration at seat: 282 for both
lobe separation 106 deg
timing:
InO: 14.5d BTDC
InC: 38.5d ABDC
ExO: 46.5d BBDC
ExC: 6.5d ATDC
power range 3000-6500, "fast road"
it says down the bottom
| Quote: |
install cam with an intake bucket lift of .125" at TDC and an exhaust bucket lift of .081" at TDC
|
what the hell does that mean
|
|
|
| | Subject | Poster | Date |
|---|
 |
whart would u call lumpy cams {18RG}
|
Mr DOHC | Wed, 23 June 2004 08:25 |
|
Re: whart would u call lumpy cams
|
M.J.H | Wed, 23 June 2004 08:44 |
|
Re: whart would u call lumpy cams
|
Mr DOHC | Wed, 23 June 2004 08:58 |
|
Re: whart would u call lumpy cams {18RG}
|
M.J.H | Wed, 23 June 2004 09:34 |
|
Re: whart would u call lumpy cams {18RG}
|
Mr DOHC | Wed, 23 June 2004 11:27 |
|
Re: whart would u call lumpy cams {18RG}
|
M.J.H | Wed, 23 June 2004 18:57 |
|
Re: whart would u call lumpy cams {18RG}
|
CelicaRA45 | Thu, 24 June 2004 06:39 |
|
Re: whart would u call lumpy cams {18RG}
|
Mr DOHC | Thu, 24 June 2004 09:48 |
|
Re: whart would u call lumpy cams {18RG}
|
V8_MA61 | Wed, 23 June 2004 11:29 |
|
Re: whart would u call lumpy cams {18RG}
|
CelicaRA45 | Wed, 23 June 2004 12:43 |
|
Re: whart would u call lumpy cams {18RG}
|
oldcorollas | Wed, 23 June 2004 13:23 |
