| Author | Topic |
|---|
Location:
Brisbane
Registered:
May 2002
|
|
Re: i want lowered springs for an mx62!
|
Sun, 27 June 2004 10:21
 
|
 |
ye ha!!!! someone is aiming a question straight at me!
For the rear I used, Kings Corona ST / RT Low LTRL-25; (stock installed height of mine were 295mm, if that is of any interest), could prbly do with a touch stiffer and 5-10mm lower in my opinion. Also had my panhard rod made adjustable ($50).
For the front I actually fitted SA63 struts (have slightly bigger brakes, better brake pad choice (can get EBC greenstuff), better spring/shock options in my opinion, with Kings MA61 Low KTFL-31 springs and the stock shocks revalved (to fit the MA61 springs you need to use the MA61 tops spring hat tho, which usually means that you need to buy a set of MA61 struts). These feel quite stiff/nice, but atm I've still got the stock tyres and I can't really feel what is letting the setup down with the poor grip! Was an amazing transformation tho!
I did have the SA63 struts in with Stock MA61 springs at one stage and there was lowering evident with these, I think I measured the hub to guard somewhere so I could work it out if you really want...
Camber is 0.3+ve on both sides with the SA63/MA61 Kings lows and 30mm Roll Center Adjusters (RCA's). I manufactured the RCA's with the help of blake and his father, cheers guys 
If you want to know anything else shoot!
Cheers
Wilbo
|
|
|
