| Author | Topic |
|---|
Location:
Lost in the K hole
Registered:
May 2002
|
|
Re: 5-stud hubs on a MA61
|
Tue, 17 September 2002 11:30
 
|
 |
you think id be stuffing around this much without first checking a bearing catalogue  i think not.
ok, so the current story is:
for the REAR, the ms123 hubs 'should' fit into the ma61 trailing arms a-ok. they run the same bearings, splines are the same, and theyre dimensionally identical (from what ive measured so far). there is a slight 'issue' regarding having the hubs/stubs pressed out of the trailing arm as it requires a 20-30ton hyraulic press, but other than that...too easy.
the FRONTS are proving a real bitch. ms112/123 hubs will ONLY fit onto the ma61 spindles using the ms112/123 bearing kit, and then making a sleeve/shim to have pressed onto the ma61 spindle to make up the difference.
the other option resides in the use of an entirely different hub which uses the same bearings as the ma61, and thus requires no modification. after a data dump of the repco database, and cross referencing this with skf bearing data, i think ive found such a hub. its going to be a rare one to find, so excuse me if i wait till i find one myself before announcing it to the world 
anyway...ill let you all know once i get it rolling.
cheers
ed
|
|
|
| | Subject | Poster | Date |
|---|
 |
5-stud hubs on a MA61
|
Norbie | Sun, 08 September 2002 01:22 |
|
Re: 5-stud hubs on a MA61
|
ed_ma61 | Sun, 08 September 2002 04:07 |
|
Re: 5-stud hubs on a MA61
|
gianttomato | Sun, 08 September 2002 07:53 |
|
Re: 5-stud hubs on a MA61
|
Norbie | Sun, 08 September 2002 08:04 |
|
Re: 5-stud hubs on a MA61
|
justcallmefrank | Mon, 09 September 2002 15:18 |
|
Re: 5-stud hubs on a MA61
|
MS-75 | Thu, 12 September 2002 04:20 |
|
Re: 5-stud hubs on a MA61
|
ed_ma61 | Thu, 12 September 2002 10:47 |
|
Re: 5-stud hubs on a MA61
|
gianttomato | Thu, 12 September 2002 10:51 |
|
Re: 5-stud hubs on a MA61
|
justcallmefrank | Thu, 12 September 2002 11:11 |
|
Re: 5-stud hubs on a MA61
|
ed_ma61 | Thu, 12 September 2002 11:03 |
|
Re: 5-stud hubs on a MA61
|
ed_ma61 | Thu, 12 September 2002 11:13 |
|
Re: 5-stud hubs on a MA61
|
justcallmefrank | Thu, 12 September 2002 11:33 |
|
Re: 5-stud hubs on a MA61
|
ed_ma61 | Thu, 12 September 2002 11:18 |
|
Re: 5-stud hubs on a MA61
|
Norbie | Thu, 12 September 2002 11:24 |
|
Re: 5-stud hubs on a MA61
|
rob_RA40 | Thu, 12 September 2002 11:46 |
|
Re: 5-stud hubs on a MA61
|
humble | Thu, 12 September 2002 12:00 |
|
Re: 5-stud hubs on a MA61
|
ed_ma61 | Thu, 12 September 2002 13:09 |
|
Re: 5-stud hubs on a MA61
|
ed_ma61 | Thu, 12 September 2002 13:33 |
|
Re: 5-stud hubs on a MA61
|
ReQuieM | Fri, 13 September 2002 13:53 |
|
Re: 5-stud hubs on a MA61
|
MS-75 | Fri, 13 September 2002 22:11 |
|
Re: 5-stud hubs on a MA61
|
gianttomato | Sat, 14 September 2002 01:06 |
|
Re: 5-stud hubs on a MA61
|
ed_ma61 | Sat, 14 September 2002 07:03 |
|
Re: 5-stud hubs on a MA61
|
justcallmefrank | Sun, 15 September 2002 08:39 |
|
Re: 5-stud hubs on a MA61
|
c2888 | Mon, 16 September 2002 00:58 |
|
Re: 5-stud hubs on a MA61
|
ReQuieM | Tue, 17 September 2002 09:03 |
|
Re: 5-stud hubs on a MA61
|
ed_ma61 | Tue, 17 September 2002 11:30 |
|
Re: 5-stud hubs on a MA61
|
rob_RA40 | Tue, 17 September 2002 23:05 |
|
Re: 5-stud hubs on a MA61
|
jdk_ii | Thu, 19 September 2002 10:47 |
|
Re: 5-stud hubs on a MA61
|
ed_ma61 | Thu, 19 September 2002 13:32 |
|
Re: 5-stud hubs on a MA61
|
humble | Fri, 20 September 2002 05:47 |
|
Re: 5-stud hubs on a MA61
|
Stefan | Fri, 20 September 2002 13:38 |
|
Re: 5-stud hubs on a MA61
|
gianttomato | Fri, 20 September 2002 14:48 |
|
Re: 5-stud hubs on a MA61
|
ma61_turbo | Sat, 21 September 2002 03:10 |
|
Re: 5-stud hubs on a MA61
|
Stefan | Sat, 21 September 2002 09:01 |
|
Re: 5-stud hubs on a MA61
|
justcallmefrank | Sat, 21 September 2002 10:12 |
|
Re: 5-stud hubs on a MA61
|
ed_ma61 | Sat, 21 September 2002 12:39 |
