| Author | Topic |
|---|
On Probation
Location:
North East NSW
Registered:
December 2002
|
|
Re: Oversized 4AC Carbys
|
Thu, 01 July 2004 01:37
 
|
 |
| Ice_majik wrote on Fri, 25 June 2004 19:34 |
The Falcon weber is a 34ADM and way to big ...dont even consider that one its a 6cyl application.
A 32/36 weber off a ford escort/cortina downdraft is the best conversion without overdoing it ... should set you back around $550 for a reco unit fitted. 
|
actually on a stock 4ac these would both probably go like shit at low rpm. they're big carbs designed for >2L engines, and won't have the low down throttle response of the original type carb, it will take a few revs (2500?) before you get decent power. that being said, they'll definately improve power up high, if you get them tuned and jetted properly they won't be too bad down low either
and yes, you can use a 34ADM on a 4ac, hell one of the guys on oldcorollas has one on a cammed 4K and it cracks, bit doughy down low but anything bigger on a 1300 is going to be like that, but i digress
|
|
|
