Author | Topic |

On Probation
Location: North East NSW
Registered: December 2002
|
Re: 4K-C head gasket
|
Thu, 01 July 2004 07:33

|
 |
the pushrods just come up out of their holes once you take the rocker gear off, that's not the problem, you see when you go to lift the head off the deck, the exhaust gives it about 15mm of upward movement before the pipe hits the floorpan and you can't go any further. so unless you jack the front up, remove the front subframe and lower the short motor down, still attached to the crossmember, it's not going to happen
|
|
|