F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 4A-GZE conversion into AE92 can't be easy as it sounds!?! Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
jasonp1977 Regular Location: Brisbane Registered: May 2002	Re: 4A-GZE conversion into AE92 can't be easy as it sounds!?! Fri, 02 July 2004 20:57 if you're putting an ae101 GZE into the rolla then you will need to source a few extra bits. -you will need an E series mechanical speedo drive to replace the electronic sender in your gearbox. or your speedo wont work. -you will need to source an ae92 GTZ rear gearbox mount if you want to bolt the motor in straight with an E series gearbox -You will have to modify the Radiator mounts to fit the AE101 radiator, it is taller than the ae92 radiator. If you plan on using your original 4af radiator then you will have to run a section of pipe/hose across the top of the headers the same as an ae82 twincam does. The radiator from an ae92 GTZ or an AE93 4age is a direct fit. -the AE101 aircon doesn't easily fit -you will need to source an ae92 timing-belt end engine mount, or hacksaw a piece off your 4af mount. -you cant use the ae101 front swaybar setup on your ae92, if you get an ae92 cut, you can use the swaybar setup. -it is possible to swap the tach sender in your gauge cluster with the one from the ae92 GZE cut so your tacho works without the need for a tach adapter which can cost an extra $100 or so. [Report message to a moderator]

	Subject	Poster	Date
	4A-GZE conversion into AE92 can't be easy as it sounds!?!	Speed Demon	Wed, 30 June 2004 04:16
	Re: 4A-GZE conversion into AE92 can't be easy as it sounds!?!	jasonp1977	Wed, 30 June 2004 04:23
	Re: 4A-GZE conversion into AE92 can't be easy as it sounds!?!	Speed Demon	Thu, 01 July 2004 03:49
	Re: 4A-GZE conversion into AE92 can't be easy as it sounds!?!	jasonp1977	Thu, 01 July 2004 04:00
	Re: 4A-GZE conversion into AE92 can't be easy as it sounds!?!	THE WITZL	Thu, 01 July 2004 08:09
	Re: 4A-GZE conversion into AE92 can't be easy as it sounds!?!	Speed Demon	Fri, 02 July 2004 09:59
	Re: 4A-GZE conversion into AE92 can't be easy as it sounds!?!	Bert	Fri, 02 July 2004 10:07
	Re: 4A-GZE conversion into AE92 can't be easy as it sounds!?!	takai	Fri, 02 July 2004 11:31
	Re: 4A-GZE conversion into AE92 can't be easy as it sounds!?!	jasonp1977	Fri, 02 July 2004 20:57
	Re: 4A-GZE conversion into AE92 can't be easy as it sounds!?!	Speed Demon	Tue, 06 July 2004 11:20
	Re: 4A-GZE conversion into AE92 can't be easy as it sounds!?!	takai	Tue, 06 July 2004 12:12
	Re: 4A-GZE conversion into AE92 can't be easy as it sounds!?!	jasonp1977	Tue, 06 July 2004 22:16
	Re: 4A-GZE conversion into AE92 can't be easy as it sounds!?!	Speed Demon	Sat, 10 July 2004 06:05
	Re: 4A-GZE conversion into AE92 can't be easy as it sounds!?!	jasonp1977	Sat, 10 July 2004 07:53

Previous Topic:	2 4agze Questions
Next Topic:	adjustable noise muffs

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.