| Author | Topic |
|---|
Location:
sunny coast, qld
Registered:
October 2002
|
|
Re: How to fit an oil catch can to a 1JZ-GTE?
|
Mon, 05 July 2004 06:34
 
|
 |
*back from dead*
I have been doing a bit of reading about this lately and there seems to be quite a lot of opinions about the installations.
So assume a non vented catch can is used with and inlet and an outlet like Danish's.
I read that you could t-piece the 2 pipes from the cam covers and run them into the inlet of the catch can and then t-piece the inlet manifold pipe with the pipe near the turbos and run them to the outlet of the catch can.
does this make sense?
would it work properly?
|
|
|
| | Subject | Poster | Date |
|---|
 |
How to fit an oil catch can to a 1JZ-GTE?
|
Danish | Tue, 15 April 2003 17:44 |
|
Re: How to fit an oil catch can to a 1JZ-GTE?
|
ytri | Wed, 16 April 2003 00:19 |
|
Re: How to fit an oil catch can to a 1JZ-GTE?
|
Danish | Sun, 27 April 2003 23:36 |
|
Re: How to fit an oil catch can to a 1JZ-GTE?
|
RobST162 | Fri, 23 April 2004 05:12 |
|
Re: How to fit an oil catch can to a 1JZ-GTE?
|
Danish | Fri, 23 April 2004 06:34 |
|
Re: How to fit an oil catch can to a 1JZ-GTE?
|
Looonie | Fri, 23 April 2004 20:27 |
|
Re: How to fit an oil catch can to a 1JZ-GTE?
|
Danish | Fri, 23 April 2004 20:51 |
|
Re: How to fit an oil catch can to a 1JZ-GTE?
|
Looonie | Sat, 24 April 2004 05:08 |
|
Re: How to fit an oil catch can to a 1JZ-GTE?
|
Danish | Sat, 24 April 2004 09:42 |
|
Re: How to fit an oil catch can to a 1JZ-GTE?
|
earlyrolla | Sun, 25 April 2004 13:35 |
|
Re: How to fit an oil catch can to a 1JZ-GTE?
|
Chris Davey | Mon, 05 July 2004 06:34 |
|
Re: How to fit an oil catch can to a 1JZ-GTE?
|
Chris Davey | Mon, 05 July 2004 22:03 |
|
Re: How to fit an oil catch can to a 1JZ-GTE?
|
Chris Davey | Tue, 06 July 2004 04:22 |
|
Re: How to fit an oil catch can to a 1JZ-GTE?
|
Manny | Tue, 06 July 2004 05:29 |
|
Re: How to fit an oil catch can to a 1JZ-GTE?
|
Chris Davey | Tue, 06 July 2004 05:33 |
|
Re: How to fit an oil catch can to a 1JZ-GTE?
|
Manny | Tue, 06 July 2004 05:47 |
|
Re: How to fit an oil catch can to a 1JZ-GTE?
|
Chris Davey | Tue, 06 July 2004 06:02 |
|
Re: How to fit an oil catch can to a 1JZ-GTE?
|
Manny | Tue, 06 July 2004 06:26 |
|
Re: How to fit an oil catch can to a 1JZ-GTE?
|
Chris Davey | Tue, 06 July 2004 06:35 |
|
Re: How to fit an oil catch can to a 1JZ-GTE?
|
Manny | Tue, 06 July 2004 08:06 |
|
Re: How to fit an oil catch can to a 1JZ-GTE?
|
Chris Davey | Tue, 06 July 2004 10:08 |
