| Author | Topic |
|---|
Location:
Northwestern Sydney
Registered:
August 2002
|
|
Re: Engineer cert for seats on stock rails?
|
Mon, 05 July 2004 23:51
 
|
 |
It's not the rails they are looking at it is the seat it self.
I remember reading somwhere that seats now need to have ADR compliance to even have a chance of being engineered in NSW.
Engineering is pretty much summed up but working out what can happen in any accident. in most (if not all) cases the seats will be put under stress and need to be engineered to provide occupant saftey. anything else that can come loose when understress and potentially cause injury to the occupants needs to be engineered. It's all red tape aimed at keeping idiots from sueing in accidents.
In this case the rails are fine if ther are factory but in an accident that isn't going to help if the seats are sitting on the bonnet or in front of the car and the rails are happily sitting where they are ment to be.
|
|
|
| | Subject | Poster | Date |
|---|
 |
Engineer cert for seats on stock rails?
|
bathurst-91 | Sat, 03 July 2004 05:24 |
|
Re: Engineer cert for seats on stock rails?
|
Cool1 | Sat, 03 July 2004 05:26 |
|
Re: Engineer cert for seats on stock rails?
|
bathurst-91 | Sat, 03 July 2004 05:40 |
|
Re: Engineer cert for seats on stock rails?
|
fade-e | Sat, 03 July 2004 06:04 |
|
Re: Engineer cert for seats on stock rails?
|
WiLo | Mon, 05 July 2004 11:00 |
|
Re: Engineer cert for seats on stock rails?
|
EvilJack | Mon, 05 July 2004 11:13 |
|
Re: Engineer cert for seats on stock rails?
|
Cool1 | Mon, 05 July 2004 11:32 |
|
Re: Engineer cert for seats on stock rails?
|
EvilJack | Tue, 06 July 2004 00:05 |
|
Re: Engineer cert for seats on stock rails?
|
bathurst-91 | Mon, 05 July 2004 11:33 |
|
Re: Engineer cert for seats on stock rails?
|
Darren | Mon, 05 July 2004 12:44 |
|
Re: Engineer cert for seats on stock rails?
|
Lambolica | Mon, 05 July 2004 23:51 |
|
Re: Engineer cert for seats on stock rails?
|
DunkyMonkey | Mon, 05 July 2004 23:59 |
|
Re: Engineer cert for seats on stock rails?
|
chubbylover53 | Fri, 09 July 2004 09:46 |
|
Re: Engineer cert for seats on stock rails?
|
no_tofu_speed | Sat, 10 July 2004 10:47 |
|
Re: Engineer cert for seats on stock rails?
|
Toobs | Sun, 11 July 2004 01:32 |
