| Author | Topic |
|---|
Location:
Newcastle
Registered:
April 2003
|
|
Re: Swaybar link to be made adjustable... any ideas?
|
Fri, 09 July 2004 16:14
 
|
 |
Yep
Get a length of threaded rod the same diameter or a bit smaller as the washers and four nylock nuts to suit.
Screw two nuts onto the rod,fit washers and bushes,fit onto car and put on the rest of the bushes,washers and nuts.
Set it at the height you want and tighten.
Could probably weld a normal nut in the middle between the inner washers to use a spanner to stop the rod turning during adjusment as well.
Might work for what you need.
|
|
|
| | Subject | Poster | Date |
|---|
 |
Swaybar link to be made adjustable... any ideas?
|
sated | Fri, 09 July 2004 15:52 |
|
Re: Swaybar link to be made adjustable... any ideas?
|
M.J.H | Fri, 09 July 2004 16:14 |
|
Re: Swaybar link to be made adjustable... any ideas?
|
sated | Fri, 09 July 2004 16:26 |
|
Re: Swaybar link to be made adjustable... any ideas?
|
fade-e | Fri, 09 July 2004 17:08 |
|
Re: Swaybar link to be made adjustable... any ideas?
|
sated | Fri, 09 July 2004 21:21 |
|
Re: Swaybar link to be made adjustable... any ideas?
|
clubagreenie | Fri, 09 July 2004 23:06 |
|
Re: Swaybar link to be made adjustable... any ideas?
|
Norbie | Sat, 10 July 2004 01:02 |
|
Re: Swaybar link to be made adjustable... any ideas?
|
sated | Sat, 10 July 2004 10:32 |
|
Re: Swaybar link to be made adjustable... any ideas?
|
allencr | Sat, 10 July 2004 12:16 |
|
Re: Swaybar link to be made adjustable... any ideas?
|
sated | Sat, 10 July 2004 13:08 |
