Author | Topic |
Location: Brisbane
Registered: February 2003
|
Re: Povo turbo install and MAP sensor bleeding 4AGE
|
Sat, 10 July 2004 06:57

|
 |
all the 4agXe injector are same impedance (2ohms) - they all need the resistor pack.
you could use resistor pack from any 4agXe engine bay.
Are you sure they're running the 4ag computer with boost? seeing as the fueling and spark tables will not have any compensation for boost (e.g. extra fueling, ignition retard) i'd say you're after an ECU that uses an AFM
Even if the MAP sensor is able to safely see boost, the ECU will have no way of safely dealing with that kind of data.
if you do use an NA ECU on a boosted engine, it might pay to have a quick dyno run to see howthe A/F mix is under boost.
|
|
|
| Subject | Poster | Date |
 |
Povo turbo install and MAP sensor bleeding 4AGE
|
HighRolla | Fri, 09 July 2004 14:15 |
 |
Re: Povo turbo install and MAP sensor bleeding 4AGE
|
HighRolla | Fri, 09 July 2004 14:57 |
 |
Re: Povo turbo install and MAP sensor bleeding 4AGE
|
Alainve | Fri, 09 July 2004 15:17 |
 |
Re: Povo turbo install and MAP sensor bleeding 4AGE
|
FKN16V | Fri, 09 July 2004 22:45 |
 |
Re: Povo turbo install and MAP sensor bleeding 4AGE
|
HighRolla | Sat, 10 July 2004 00:13 |
 |
Re: Povo turbo install and MAP sensor bleeding 4AGE
|
thechuckster | Sat, 10 July 2004 01:05 |
 |
Re: Povo turbo install and MAP sensor bleeding 4AGE
|
HighRolla | Sat, 10 July 2004 01:41 |
 |
Re: Povo turbo install and MAP sensor bleeding 4AGE
|
Alainve | Sat, 10 July 2004 03:54 |
 |
Re: Povo turbo install and MAP sensor bleeding 4AGE
|
thechuckster | Sat, 10 July 2004 06:57 |
 |
Re: Povo turbo install and MAP sensor bleeding 4AGE
|
HighRolla | Sun, 11 July 2004 08:03 |