| Author | Topic |
|---|
Location:
Brisbane
Registered:
October 2002
|
|
Re: HEAD STUDS vs. HEAD BOLTS
|
Mon, 12 July 2004 09:19
 
|
 |
there are 2 types of head bolts available {non ARP i mean},
std bolts, reuseable time and time again
and torque-to-yield, the torque to yield is the one where u "tighten to 50nm, back all the way off, turque to 25nm aqnd turn 90 degs and turn 90 degs again". NEVER re-use them cause it will end in tears.
how r u supposed to make the stud stay in the block when u pull the head, i suppose it doesnt matter, cause u can just pull the nut off the stud and re-insert it.
as head bolts/studs dont go into water/oil galleries then there wouldnt be a problem using oil/loctite would there.
witzl, why should 18RG ppl be included, do they potentially have HG problems
|
|
|
| | Subject | Poster | Date |
|---|
 |
HEAD STUDS vs. HEAD BOLTS
|
thetoyman75 | Sun, 11 July 2004 08:36 |
|
Re: HEAD STUDS vs. HEAD BOLTS
|
fade-e | Sun, 11 July 2004 08:50 |
|
Re: HEAD STUDS vs. HEAD BOLTS
|
earlyrolla | Sun, 11 July 2004 09:33 |
|
Re: HEAD STUDS vs. HEAD BOLTS
|
kingmick | Sun, 11 July 2004 09:52 |
|
Re: HEAD STUDS vs. HEAD BOLTS
|
fade-e | Sun, 11 July 2004 10:31 |
|
Re: HEAD STUDS vs. HEAD BOLTS
|
THE WITZL | Sun, 11 July 2004 10:46 |
|
Re: HEAD STUDS vs. HEAD BOLTS
|
ed_ma61 | Sun, 11 July 2004 11:24 |
|
Re: HEAD STUDS vs. HEAD BOLTS
|
allencr | Sun, 11 July 2004 13:06 |
|
Re: HEAD STUDS vs. HEAD BOLTS
|
ed_ma61 | Sun, 11 July 2004 13:11 |
|
Re: HEAD STUDS vs. HEAD BOLTS
|
toynado | Sun, 11 July 2004 17:12 |
|
Re: HEAD STUDS vs. HEAD BOLTS
|
ed_ma61 | Sun, 11 July 2004 17:25 |
|
Re: HEAD STUDS vs. HEAD BOLTS
|
Mr DOHC | Mon, 12 July 2004 09:19 |
|
Re: HEAD STUDS vs. HEAD BOLTS
|
Super Jamie | Mon, 12 July 2004 10:55 |
|
Re: HEAD STUDS vs. HEAD BOLTS
|
toynado | Tue, 13 July 2004 01:48 |
|
Re: HEAD STUDS vs. HEAD BOLTS
|
Super Jamie | Tue, 13 July 2004 01:59 |
