| Author | Topic |
|---|
On Probation
Location:
North East NSW
Registered:
December 2002
|
|
Re: HEAD STUDS vs. HEAD BOLTS
|
Tue, 13 July 2004 01:59
|
 |
| toynado wrote on Tue, 13 July 2004 11:48 |
peepl say a bolt with a groove cut into it lengthwise makes a good thread cleaning tool
|
this is true, aquire an old head bolt and cut down it with the angle grinder, wind it in and out a few times, cleaning in between passes. however if i was spending several hundred dollars on head studs, i wouldn't mind spending another 10 bucks on a proper thread cutter from a fastener shop, which will do a better cleaner more precise job
|
|
|
| | Subject | Poster | Date |
|---|
 |
HEAD STUDS vs. HEAD BOLTS
|
thetoyman75 | Sun, 11 July 2004 08:36 |
|
Re: HEAD STUDS vs. HEAD BOLTS
|
fade-e | Sun, 11 July 2004 08:50 |
|
Re: HEAD STUDS vs. HEAD BOLTS
|
earlyrolla | Sun, 11 July 2004 09:33 |
|
Re: HEAD STUDS vs. HEAD BOLTS
|
kingmick | Sun, 11 July 2004 09:52 |
|
Re: HEAD STUDS vs. HEAD BOLTS
|
fade-e | Sun, 11 July 2004 10:31 |
|
Re: HEAD STUDS vs. HEAD BOLTS
|
THE WITZL | Sun, 11 July 2004 10:46 |
|
Re: HEAD STUDS vs. HEAD BOLTS
|
ed_ma61 | Sun, 11 July 2004 11:24 |
|
Re: HEAD STUDS vs. HEAD BOLTS
|
allencr | Sun, 11 July 2004 13:06 |
|
Re: HEAD STUDS vs. HEAD BOLTS
|
ed_ma61 | Sun, 11 July 2004 13:11 |
|
Re: HEAD STUDS vs. HEAD BOLTS
|
toynado | Sun, 11 July 2004 17:12 |
|
Re: HEAD STUDS vs. HEAD BOLTS
|
ed_ma61 | Sun, 11 July 2004 17:25 |
|
Re: HEAD STUDS vs. HEAD BOLTS
|
Mr DOHC | Mon, 12 July 2004 09:19 |
|
Re: HEAD STUDS vs. HEAD BOLTS
|
Super Jamie | Mon, 12 July 2004 10:55 |
|
Re: HEAD STUDS vs. HEAD BOLTS
|
toynado | Tue, 13 July 2004 01:48 |
|
Re: HEAD STUDS vs. HEAD BOLTS
|
Super Jamie | Tue, 13 July 2004 01:59 |
