F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Better motor to hot-rod? Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
thechuckster Forums Junkie Location: Brisbane Registered: February 2003	Re: Better motor to hot-rod? Wed, 14 July 2004 08:56 V8_MA61 wrote on Wed, 14 July 2004 18:26 no intercooler. Not a neccessity really. Mount the Sc at the front of the motor, a Vortech style one. That is "if" when i do more research and measuring, an eaton one sitting on the side of the motor cant fit. As these are a lot cheaper. Injectors would be the 1uzfe job id imagine. 400cc should do me thinks them injectors not big enuf for 6cyl S/C engine (even a low boost item) - i'm using 4agze on the turbo 18rc and they're 365cc - i'd aim for 7mgte (430cc) as a minimum otherwise you'll end up with the injectors at max duty before the power curve peaks and leanout (a precursor to rapid engine failure) will follow shortly after. ..are you sure it's safe to use the words "cheaper' and 'eaton' or even 'vortech' in the same paragraph? go to <www.capa.com.au> - after taking deep breath. If you're not going to reduce compression then you really should consider some form of intercooling to reduce intake temps - a W/A unit perhaps? you'll have to mount it high on the exh side or way low on the intake (like 1G-gze) so you'll have serious pipework to fabricate - so while you're doing that, you may as well plumb in a cooler? oh... you'll need some kind of aftermarket computer - either commercial (haltech, motec, ...) of diy (megasquirt, UMS) - i think that's a given. [Updated on: Wed, 14 July 2004 08:57] [Report message to a moderator]

	Subject	Poster	Date
	Better motor to hot-rod?	V8_MA61	Wed, 14 July 2004 07:59
	Re: Better motor to hot-rod?	wilbo666	Wed, 14 July 2004 08:18
	Re: Better motor to hot-rod?	V8_MA61	Wed, 14 July 2004 08:26
	Re: Better motor to hot-rod?	CrUZsida	Wed, 14 July 2004 08:53
	Re: Better motor to hot-rod?	thechuckster	Wed, 14 July 2004 08:56
	Re: Better motor to hot-rod?	V8_MA61	Wed, 14 July 2004 08:33
	Re: Better motor to hot-rod?	V8_MA61	Wed, 14 July 2004 12:52
	Re: Better motor to hot-rod?	Joshstix	Thu, 15 July 2004 01:02
	Re: Better motor to hot-rod?	Norbie	Wed, 14 July 2004 23:14
	Re: Better motor to hot-rod?	V8_MA61	Thu, 15 July 2004 07:59
	Re: Better motor to hot-rod?	Norbie	Thu, 15 July 2004 23:56
	Re: Better motor to hot-rod?	V8_MA61	Fri, 16 July 2004 15:04
	Re: Better motor to hot-rod?	chrisss	Fri, 16 July 2004 16:49
	Re: Better motor to hot-rod?	V8_MA61	Sat, 17 July 2004 02:09
	Re: Better motor to hot-rod?	ed_ma61	Fri, 16 July 2004 18:34
	Re: Better motor to hot-rod?	Jag7799	Sat, 17 July 2004 00:42
	Re: Better motor to hot-rod?	mrshin	Sat, 17 July 2004 07:53
	Re: Better motor to hot-rod?	V8_MA61	Sat, 17 July 2004 09:38
	Re: Better motor to hot-rod?	wilbo666	Sun, 18 July 2004 04:07
	Re: Better motor to hot-rod?	V8_MA61	Sun, 18 July 2004 13:25

Previous Topic:	Clutch Kit
Next Topic:	4A-GE 100kw owners - power DROPS at 4.5-6Krpm (dyno pics)

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.