If I want this switch to switch on an injector as soon as any boost is detected I would need a 15psi hobbs switch to come on just around the point where pressure is above atmospheric? right?
I'm just getting confused because this article below talks about an already turbod car that only needs the extra injector if running above 14.7psi boost..but then he recommends the 15psi hobbs switch (adjustable 14-24 psi)..does this mean he'd have to adjust to about 20 or so psi for his application if what he says is true.
I see Hobbs switches that are 2psi also, what would these be good for, as someone on ebay is selling then for automotive stuff?
Is the 15psi the one people use when they fit a turbo to a NA car and want to switch extra injector.
15psi hobbs switch or 2psi?
Wed, 14 July 2004 12:19
